Yep, the shiney part

Posted by mike on Thursday, September 09, 2004 at 11:11PM :

In Reply to: If you have a Dana/Spicer 60 rear end.... posted by Eric B. on Thursday, September 09, 2004 at 10:53PM :

Eric, It is the shiney part that the bearings ride on. I think that the part number inthe pictue you posted is 2.03.3.
The wheel cylinder was leaking so I got kits from the local parts house and everything went great until I tried to put the axle back in and the eight holes wouldn't line up with the studs in the hub. The axle looks straight, but when you get it almost all the way in, it feels like it is hitting on the back of the spindle, so it won't let it line up. When I looked at the spindle I can tell it is slightly bent in the direction of the misalignment. Is spindle the right word for this part? The truck ran great and just needed to stop a little brake fluid leak! I live in Comanche Texas, which is close to nowhere. I am about 120 miles south west of DFW.
Thanks for taking the time to help. Mike

Follow Ups:

• Are you sure the spindle is bent? - Eric B. 11:22PM 09/09/2004
  • Re: Are you sure the spindle is bent? - Chris Lube Lublin 1:17AM 09/10/2004
  • I guess I need to check again. - mike 11:36PM 09/09/2004
    • Good luck! - Eric B. 11:44PM 09/09/2004
      • Re: Good luck! - mike 11:54PM 09/09/2004
        • If you only use the truck.... - Eric B. 11:06AM 09/10/2004
          • Re: If you only use the truck.... - MoparNorm 6:30PM 09/10/2004
  • Pictures.... - Eric B. 11:36PM 09/09/2004

Post a Followup