Re: Carb problems.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by JimmieD on Monday, September 06, 2004 at 2:31AM :

In Reply to: Carb problems. posted by stephen on Monday, September 06, 2004 at 2:23AM :

Sometimes you can use a heli-coil repair kit available from Napa. If it's not critical that it look 100% you can use some JB Weld to 'solder' the fitting in, then use a short piece of rubber fuel hose to connect to it as a flex joint to prevent the JB from cracking. JB cures out to over 2,500 psi tensile strength so it's up to the job.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com