Posted by M.Yerxa on August 10, 1999 at 12:41:03:
In Reply to: Dana 70 35 spline? posted by Chris Willsey on August 08, 1999 at 19:47:21:
I can't quite figure out what you want, but here goes anyway
Source: Spicer Axle Kit book 67 - 78
checking back and forth between the front and rear listings the part numbers for the Differential case assemblies (case,
gears and side gears) are the same under W300/W200 groups, but only within certain given ratios and only between 1 piece and
2 piece cases respectively and not power-loc of course which carries it's own no. All axles listed for front and rear
have 35 splines at the side gears. Drive pinion and gear assemblies also carry the same numbers from front to rear in
the same ratios. Care must be taken when going outside the w300 area for rear axles in the Dodge family. The motor homes
and some other models show different numbers for some applications. International also used 70's front and rear and I
checked their numbers and got matches. One final note, this manual I have is known for omissions. I hope I answered your
question.
I currently have a front and rear 70 from a 71 international for sale looks like a bolt in to Dodge. Has closed balls.
Mike Y.