Posted by Ron L on Sunday, August 01, 2004 at 6:12PM :
In Reply to: Front brake rotor removal "79" powerwagon posted by Tom on Sunday, August 01, 2004 at 3:04PM :
Tom, You will notice a hole in the rotor probably somewhere inside the lug nut bolt circle. This hole serves a dual purpose,one on which is to insert a socket in to remove bolts behind the rotor that holds the wheel bearings, rotor etc. in place. Remove these bolts and the rotor and wheel bearings will come off together. The other purpose of this hole is to grease the wheel bearings. There is a grease zerk in the bearing retainer cap. They should be lubed every 3K miles.