Posted by CJ in AK on Tuesday, July 06, 2004 at 7:34PM :
In Reply to: Snowplow Information for 48 FFPW B-1 posted by Northern Calif Dave on Tuesday, July 06, 2004 at 5:38PM :
Meyers snowplow with a slightly modified Chevy attach bracket. Three snow seasons thus far, lots of snow, lots of plowing, no problems. I can take some close up digital pics of the attach mount and email if you wish. The Chevy mount has the right width to fit between the Dodge frame. I welded in some pads to saddle under the frame then fabricated a couple support brackets that go from the bottom of the attach bracket to the heavy u shaped crossmember that the radiator and the engine mount to. Bolted on with four large grade eight bolts on each side in front of the leaf spring shackles. The plow mount is the tube style that slides right out of the attach bracket so in the summertime I can remove the entire pump, plow, lights, ect. and just leave the attach bracket hanging underneath.
Follow Ups: