Posted by Vaughn on Wednesday, April 14, 2004 at 9:18PM :
In Reply to: M37 front axel bearing on lower ball pivit? posted by Doug Boeve on Wednesday, April 14, 2004 at 7:30AM :
You should also get two Knuckle Repair Kits. These will have the felt seals, gasket for the retaining ring and shims to properly adjust the knuckle drag on reassembly. Not all repair kit have the shims so make sure you ask before you buy. If the seller is not sure, have them open a kit. Adjust the drag prior to installing the felt seal. You should also consider buying new upper bronze cones