Posted by Ray on June 04, 1999 at 21:45:00:
In Reply to: questions about brakes and parts for 54 C1PW posted by Al Sniadowski on June 04, 1999 at 21:20:31:
If you will visit our web site www.helitool.com you will find what information I currently have on a conversion MC for M37. Also towards the end of the disc brake instalation manual (on the same site) you will find pictures and part numbers for hoses and fittings to replace the originals. I have found that the ford mustang cyl. that I was planing to use is too small bored (1") and a minimum of 1 1/8" is required preferably 1 1/4" even for 4 wheel disc brakes. I have purchased several cylinders that are identical to the mustang unit phisicaly but have the larger bores and if I can ever get caught up on the manufacturing side of this business and get my M37 s engine installed I will have the final configuration worked out in short order and the info. uploaded to our site. If you have any specific questions to ask please let me know.