Posted by Paul(in NY) on Saturday, January 10, 2004 at 5:10PM :
In Reply to: Re: Beep Beep posted by David Sherman on Saturday, January 10, 2004 at 1:34PM :
Tha NAPA store abiout 15 miles from here bends over backwards to help on my hard to find needs. They have never let me down.
Getting parts for the Carryall is much easier since I have a book with all the NAPA numbers I used on my PW. The Diesel/NV4500/NP-205 did create a few strange needs.
I still have to find the tubeing/hose from the clutch Master Cylinder to the Slave Cylinder for a Dodge CTD with NV-4500. You can buy the Slave Cylinder (which I did) but you can not buy the huse/tubeing to connect the MC with the Slave. Simply its not available even from Mother Dodge. Dodge will only sell you a assembly slave/MC and Tube/hose. The big problem is that the fitting on the slave end is a push in with a O Ring and then a pin is pushed in to hold it all in place. Anyone have a junk tube out there, only need the fitting from the slave end.
Paul
Paul
Follow Ups: