Posted by Fred Coldwell on Tuesday, December 16, 2003 at 6:04PM :
In Reply to: Boy, have I been wrong! posted by Paul Cook on Tuesday, December 16, 2003 at 4:37PM :
Paul: I agree with most everything you say above, but you apparently misread or misunderstood my earlier message to David. I apologize to your blood pressure for not being more clear; I'll try again. What I was trying to say to David was this: if running the rear drive shaft from the model 200 t/c upper output behind the brake drum to the PW stock offset rear axle was the "easy fix" David thinks it might be, then the PWs would have come from the factory that way. That the PW came from the factory using the lower output on the model 200 t/c to the offset rear axle suggests this is the best position for the rear drive shaft if he keeps his offset rear axle as noted in the header to his question. Alternatively, if he wants to use his suggested "easy fix", running the rear drive shaft from the upper t/c output behind the brake drum, then he should also use a centered rear end axle and not the stock offset PW rear axle he now has and was asking about. I don't think we disagree; I think you misunderstood what I was telling David. Settle down and have a Merry Christmas.