Posted by Ken See on Wednesday, November 26, 2003 at 3:27PM :
In Reply to: Gutters on Cab posted by Greg on Wednesday, November 26, 2003 at 3:08PM :
I did that, go to a resto shop, they should have a roller that can make new ones. Drill out the spot welds with a spot weld cutter on the old ones and take it to them. Drill small holes in the new ones, and weld the hole (of course while on cab) filling it flush, grind it a little bit and your done. Sort of, fill with bondo where appropriate. A lot of work, but worth it.