Posted by Tom on May 14, 1999 at 13:19:25:
In Reply to: Re: Beating rust with finishing resin posted by Tom on May 14, 1999 at 12:31:55:
I misled on the technique of applying the glass cloth. Wet it out with the Sikaflex with a squeegee first on plastic wrap or wax paper, THEN apply to the prepped surface. Otherwise you'll go nuts trying to handle it without bunching, etc. Wetted glass cloth is tough to handle anyway. Flip it over onto the surface being filled after wetting, then peel away the plastic wrap. The Sikaflex comes in three "speeds" - get the slowest. It is least expensive at about 7 or 8 bucks per tube, and still drys within hours.