Re: Rear Spring Removal


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dave on Saturday, November 08, 2003 at 4:47PM :

In Reply to: Rear Spring Removal posted by Ray on Saturday, November 08, 2003 at 1:20PM :

I just did mine two days ago.I welded a large nut to a 1/8n.p.t. pipe plug(this is the same thread as the grease nipple)Screw the plug into the pin and use a slide hammer to pull on the nut.The pipe plug i used was steel so it was a 10 second job with a M.I.G.welder.Good luck.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com