NP540 - Clutch Help Needed

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Jimbo from NEPA on Friday, October 24, 2003 at 11:33PM :

I am working on a repower in my 1957 FF PW. I am using a helitool kit with a V8, 1968 W200 bell housing and an NP540 tranny from a D500. The only problem I have not overcome is the clutch. The NP540 has a 1 3/8"spline with 10 teeth. The W200 had an 11" clutch with 1" spline and 10 teeth. I need an 11" clutch with 1 3/8" spline and 10 teeth.

Can I just order the throwout bearing and pressure plate for the W200 and the clutch disk for the D500?? Or would the entire clutch from the D500 work in the W200 bellhousing?? A listing at NAPA shows the 11" clutch with 1 3/8" spline with 10 teeth and all parts are available. I hesitate to order without some feedback from the experts.

Thanks for any help.

Jim

Follow Ups:

Re: NP540 - Clutch Help Needed - Gary Robertson 11:08AM 10/28/2003

Re: NP540 / Clutch info from Rob - Gary Robertson 10:53AM 10/29/2003

Thank you for all the Input - Jimbo from NEPA 10:55AM 10/25/2003

Re: NP540 - Clutch Help Needed - Gordon Maney 10:12AM 10/25/2003

Re: NP540 - Clutch Help Needed - David 4:12AM 10/25/2003

NP540 - Clutch Help? - Will Liebscher in Los Angeles 2:57AM 10/25/2003

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com