Posted by Willy-N on Friday, September 19, 2003 at 11:49PM :
In Reply to: What sort of pump and motor are you looking for? posted by Brian A. on Friday, September 19, 2003 at 11:28PM :
It has to at least pump 200 gals a minuit, hold 48 psi thru a 1 inch opening. Most Bean pumps are high presure (up to 850 psi) but low volume aprox 8 gpm max. The trash Pumps are high volume and low presure. It also has to pump this specs and draft from a 10 ft drop. It takes about 20 plus HP and a good pump to do that. It has to fill a 1,000 gal tank in less than 15 minuits drafting. Mark H.
Follow Ups: