Re: Steering Column Removal - 47 WDX


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Garth Quapp From Alberta on Monday, September 01, 2003 at 7:17PM :

In Reply to: Steering Column Removal - 47 WDX posted by Andy on Monday, September 01, 2003 at 6:59PM :

I posted the same question awhile back. What are you trying to do? Remove the steering column? If that is the case, the steering box and column are an assembly. I wouldn't recommend taking the inner steering shaft out because that would require disassembly of the steering box, and because it is a recirculating ball type box, that is way to much work. If you are trying to just remove the column and don't want to take apart the steering box, then disconnect the horn wire from the base of the column and then remove the 4 bolts that hold the box to the frame. Then remove the box through the bottom. It will not come out through the cab. Trust me ...I tried.
Good luck!



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com