Posted by mannyc on Saturday, August 09, 2003 at 6:31PM :
i need help with my turn signals. my m37 (now 12v) has a signal stat 900 wired (not butchered into) the stock wiring harness. it has always worked flawlessly. to use the signal stat 900 with 24v the pilot bulb was the only thing that needed to be changed. when i went to 12v i changed all the bulbs to 12v and used a 12v flasher and 12v pilot bulb. i am now having a problem in that the flashers flash too fast (like when there is a problem or a bulb out)and the pilot light stays on all of the time. any ideas as to why i am having this problem? anyone come across this? thanks, mannyc
Follow Ups: