Re: door hardware


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Steve Cook on April 05, 1999 at 13:16:39:

In Reply to: door hardware posted by Alan on April 02, 1999 at 17:47:54:

On your door hardware, shold be a pin holding them on. You have to deporess the cruscheon(shiny round thin under the handles spring loaded) to expose the pin. Just use a small punch or nail and push out the pin. For the door lock, open the door and look just above the latcth(or maybe below) for a small round hole. Lok in that hole to see a set screw that holds the lock in place. It will probaly be rusted tight and be careful, it is s slotted screw and you can strip the head pretty easily. I had to drill the last one out that I did. Use a small screw driver because sometimes the set screw is recessed in the hole. Use a bright light to spot it, sometimes it is easier to see from the inside panel.

Steve


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]