Posted by Photo Classified on Monday, July 14, 2003 at 8:22PM :
This is a Braden LU2 winch set-up for 1961 to 1966 W100 Town Wagon and Town Panel Trucks, it will also fit W100 and W200 Dodge Pickup Trucks from 1961 to 1968. Some of the pieces of the winch set-up will work on other years and models but the complete set-up will only work on the models and years listed.
This winch comes with:
Transfer Case with PTO installed
Drive Shafts
PTO Engagement Cable
Frame Extensions with Cross Members
The Winch Assembly
It includes all the pieces needed to install the winch on your truck including such pieces as the PTO engagement cable clamp that mounts to the transfer case cross member, all the brackets for mounting the PTO, drive shaft, and almost every other piece you will need to install this winch on your truck.
The transfer case is included with this so you can just bolt it in the place of your existing transfer case as the PTO needs to be installed professionally and shimmed for proper gear lash if it were to be installed into an other transfer case. This way you can just bolt in and you are done.
The only piece that is missing is the locking portion of the handle for the winch de-clutching lever, which is essentially a piece of pipe with a roll pin in it.
CONDITION: All of the pieces seem to turn freely and operate thought I have not had this winch on a vehicle that ran so I have not been able to test its functionality. For anyone interested this is a 1966 date coded winch if you are looking to do a correct restoration.
Located in Madison Wisconsin
Phone number 608-274-2788
Email townwagon@hotmail.com