Posted by rsteller on Tuesday, June 03, 2003 at 9:19PM :
I'm getting ready to mount the cab back on my B4, and I'm a bit confused as to the rubber isolator configuration. (I'm cutting my own from Neoprene tubing from McMaster Carr). At disassembly I removed 4 metal tube/washers that fit inside the rubber but there is not a clear front or rear set. The old rubber was long gone. I have 2 tubes that are 2.25" long, one that is 3" long, and one that is 1.5" long. This last one came off the drivers corner and had a 5/8" bolt through it. The others are fo 1/2" bolts like the parts book specs. From what I can find the thin rubber pieces were 5/8" thick and the thick ones were 1 5/16" thick. I can't piece this together with the parts and info I have. Should'a looked at other trucks at the Hollister Rally! Anybody know what goes where? The parts book doesn't help. Thanks!
Follow Ups: