Posted by MoparNorm on Tuesday, May 13, 2003 at 8:20AM :
In Reply to: Lock-out hubs and lockers? posted by Scott in TX on Tuesday, May 13, 2003 at 1:27AM :
Hi Scott,
The transfer case is a NP203, Mile Marker made a kit to convert that case. The reviews are mixed as far as the longevity of the conversion. The axles may not be adaptable to hubs, it depends upon your axle hub. Early full time DANA 44F axles did not have a stub on which to mount the lock out hub. Look at your axle and see if there is a stub with a bolt flange or is the axle end recessed? If the axle is recessed or flat, there are no hubs made to fit that axle. If you have a stub that protrudes then you can install locking hubs. The front axle in this picture is a hubless DANA 44F.
MN