Re: $10,000 in receipts???? Come on now....


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by The List on Monday, May 12, 2003 at 8:51AM :

In Reply to: $10,000 in receipts???? Come on now.... posted by Steve on Monday, May 12, 2003 at 1:45AM :

I have went completely thru this truck and added some modern updates to it. The brake system is brand new along with the complete fuel system. I had new 9.00 X 16 Specialty Tires, tubes and liner put on Budd Split Ring Rims. There is a new pressure plate, clutch disk, throw out bearing and resurfaced flywheel put in along with all new universal joints. New shocks, completely new wiring with Marine Grade Cable, all new switches, new extra oil pressure, water temp gauges to back up working original ones. It has been converted to 12 volts and all lamps and sockets are new. I installed a 6-blade fan and new water pump along with all new belts and hoses. I made up a spec book on the wiring and all wires are color coded and terminated into a new High Tech Modern Fuse Panel. All drive line seals have been replaced along with the door and window seals. New tinted glass, head liner, carpeting, 12 volt windshield wiper system, 13,000 btu heater with 2 speed fan, 4 way flasher/turn signals by Signal Stat, Fire Truck work lights for back up lights. I also put in a Ford Ranger Split Bucket seat (adjustable, mounted on original seat frame) with 2 new seat belts. The 2 sets of Halogen head lights each with there own switch and dimmer, since both sets have brights also. The fuel tank has been replaced with a new 18 gallon aluminum tank with new original fuel sending unit to work the one in the dash. Skid plates have been installed to protect the fuel tank and radiator. I sand blasted all metal bare before either under coating or priming and painting it including the frame. I sprayed Stone Coat on the fenders, bed sides, splash shield, bumper upper head lights, grill and door panels before painting them. Herculiner Bed Coating was put on the Running Boards and top of the Flat Bed. The Frame was coated with 3M Rubber Under Coating also. It has a Reciver Hitch along with a Trailer Jack wired into the lights and ready for a Electric Brake Control if needed.

You owe mark an apoligy



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com