Posted by Dan on Sunday, April 27, 2003 at 5:40PM :
How do the brake lines get hooked up, mainly from the junctions at the axles to the booster or master cylinder, and how does the mc connect to the booster?
Also, my old gas tank was rusted out. It had the small sending unit in the top and the fuel line opening in the bottom. My refurbished tank from VPW has a large hole in the top, and no pickup in the bottom. Will the stock fuel pump at the motor handle the lift if up put a pickup line down into the tank from the top, and what can I use for a sending unit that will fit in that hole? [I will probably use a new VDO or SW gauge, but I have the option of using an original gauge. Thanks