Posted by Ang on Friday, April 18, 2003 at 0:12AM :
In Reply to: Re: E-Z out help!! posted by Joe Lorenzino on Thursday, April 17, 2003 at 8:10PM :
Thanks guys. This happened on the two screws on the bottom of the windshield. I had one good hole and one bad hole with the E-Z out in it.So heres what I did to fix my screw up.I took a peice of 3/8 x 3" stock. Drilled and tapped two 1/4x28 holes 1" off center each way.Then centered the holes in a 7/16" strip and cut it off. Bent it with some heat to fit the frame then TIG welded it on. Its better than new.