Posted by C.J. Meier on February 27, 1997 at 20:13:06:
In Reply to: How do you adjust the doors on a WM300? posted by Joe Cimoch on February 26, 1997 at 22:10:19:
: I'm having a problem with the driver's door on the Power Wagon.
: It closes hard and takes a good pull to open. I've got
: a good rub mark on the cab, about 12 inches above the
: door catch. Any ideas?
This might be a little unconventional but it seemed to work for me
1st Take a 4lb hammer and bash the upper door hinge on the cab side
a couple times. 2nd Stick a short 2x4 down inbetween the bottom
hinge and close the door. Redue steps 1 and 2 if required. This
method is dependent on the condition of your truck of course. Note:
The author of this text is not responsible for any adverse conditons
that may occur. DO THIS AT YOUR OWN RISK! Although it is pretty tough
to do any damage to these rigs. Good Luck and Good Dodge-ing. C.J.